addressable fire systems – Signaline Linear Heat Detection and Linear Water Detection

The Signaline HD SKM-95 and SKM-03 controllers are used with our Signaline HD linear heat detection cable.

They provide early warning of an impending fire by detecting overheating in environments that are difficult to monitor.

Some examples of where Signaline is used can be found here.

Here are the top five things you might not know about our SKM Controllers:

1. IP65 rated

Providing a higher level of ingress protection ensures reduced maintenance while allowing the controller and sensor cable to be field-mounted in exposed areas.

2. Approved by VdS to EN54 part 5

LGM strives to only offer products that reach distinguished international standards – the SKM-03 and SKM-95 controllers and Signaline HD and HD-R are approved to EN54 part 5 by VdS.

3. Flexible and easy to install

The back box can be mounted ‘up’ or ‘down’ and the internal PCB and the front plate can be rotated to match. Additionally, both the SKM-03 and SKM-95 are supplied with an EOL termination box. You’re all set for an easy and quick installation!

4. Low Current Consumption

Even in alarm state the unit has a low current consumption which means there is no need for extra battery back up on conventional or addressable systems.

5. Compatible with conventional and addressable detection systems

For conventional systems the SKM-03 is the ideal solution. Whereas if you are using an Apollo addressable XP95 or Discovery loop then the SKM-95 can sit directly on the loop without the need for extra monitor modules!

If you want to find out more please contact our sales team.

Did you know that Signaline offers the only EN54 approved analogue linear heat detection system in the world which is loop powered and addressable?

Our Signaline SKM-95 Controller – approved by VdS – is compatible with Apollo XP95/Discovery addressable systems.

The controller has its own addressing dip switch and is powered directly from the loop. This eliminates the need for loop interfaces or additional power supplies and provides significant cost savings.

Using a Signaline SKM-95 Controller is an ideal way of integrating linear heat detection with large BMS fire systems, such as in a multi-storey car park installation.

Combining the SKM-95 Controller with Signaline HD analogue cable allows you to integrate this part of your fire detection system onto the same loop as other areas of your network. In short, it’s a very efficient and practical form of fire detection.

The SKM-95 Controller is also IP65 rated and comes with an End of Line Unit, making installation extremely simple and efficient.

If you would like to make an enquiry about this product please email: sales@lgmproducts.com.