We would like to invite you to be among the first to see our brand new Signaline Brochure for 2017!
The brochure has everything you need for a fire or water detection system from analogue and digital cable, through to control panels and accessory clips.
You’ll find all the details for the two fire detection options in our Signaline HEAT range: the VdS approved Signaline HD analogue system and the UL/FM approved Signaline FT fixed temperature cables.
The detection cables detect heat anywhere along their length and are compatible with both addressable and conventional systems.
Signaline HEAT is ideal for a wide range of applications including car parks, tunnels, cable trays, conveyors and warehousing. Signaline HEAT can also be used in intrinsically safe areas making it suitable for hazardous applications as well.
For water detection, look no further than Signaline WATER which offers a low cost and effective way to detect water ingress and prevent flooding.
The brochure includes details about the Signaline WATER WDM-KM module which can monitor up to 1,000m of Signaline WATER Water Leak Detector and is easily interfaced with BMS and other control systems.
Our linear detectors are 100% manufactured in the UK and they have a wide range of third party approvals from both international organisations and local bodies – a testament to the high quality of the products.
Find out more by downloading the brochure (pdf) or by contacting our sales team.
The Signaline HD SKM-95 and SKM-03 controllers are used with our Signaline HD linear heat detection cable.
They provide early warning of an impending fire by detecting overheating in environments that are difficult to monitor.
Some examples of where Signaline is used can be found here.
Here are the top five things you might not know about our SKM Controllers:
1. IP65 rated
- Providing a higher level of ingress protection ensures reduced maintenance while allowing the controller and sensor cable to be field-mounted in exposed areas.
2. Approved by VdS to EN54 part 5
- LGM strives to only offer products that reach distinguished international standards – the SKM-03 and SKM-95 controllers and Signaline HD and HD-R are approved to EN54 part 5 by VdS.
3. Flexible and easy to install
- The back box can be mounted ‘up’ or ‘down’ and the internal PCB and the front plate can be rotated to match. Additionally, both the SKM-03 and SKM-95 are supplied with an EOL termination box. You’re all set for an easy and quick installation!
4. Low Current Consumption
- Even in alarm state the unit has a low current consumption which means there is no need for extra battery back up on conventional or addressable systems.
5. Compatible with conventional and addressable detection systems
- For conventional systems the SKM-03 is the ideal solution. Whereas if you are using an Apollo addressable XP95 or Discovery loop then the SKM-95 can sit directly on the loop without the need for extra monitor modules!
If you want to find out more please contact our sales team.
In the last month, we were delighted to sell the millionth metre of our Signaline Linear Heat Detection cable.
If you stretched it out from our offices in Farnham, UK the linear heat detection cable we have distributed would reach all the way to Berlin in Germany!
We want to thank all our customers and distributors around the world who have specified, purchased and installed our detection cable.
Signaline Linear Heat Detection is designed for use with a wide range of commercial and industrial fire detection systems.
Our cables detect heat anywhere along their length and are compatible with both addressable and conventional alarm systems.
The million meters sold have been used in a variety of applications from car parks in the Brighton, UK to cement works in Vietnam.
For more information about our range please browse our website for more information or contact our sales team directly.
LGM Products is pleased to be able to offer our customers a dedicated Signaline WATER detection control panel. The control panel provides a complete water detection solution where a fully monitored system is required.
The panel is designed in keeping with the market-leading conventional fire detection panels and is available in either 2 or 4 zones. The panel can be used to monitor up to 4km of Signaline WATER detection cable.
The panel’s alarm relay contacts can also be connected to other building management systems. For example, an alarm from the panel can shut down a water supply if the cable has detected an overflow.
Monitor 4km of Signaline WATER detection cable
- Four Signaline WDM-KM modules can be connected to the panel and each module can be attached to 1000m of water detection cable.
- Dependency modes, input/output matrix programming and two monitored sounder circuits.
- Alarm relay contacts allow the panel to connect to other building management systems.
Quick and Easy Installation and Maintenance
- Small compact enclosure
- Quick start guide
- One-man walk test mode
For more information click here
For a quotation for your Signaline WATER detection system, please contact our sales team.
Many years of experience serving industrial markets means we understand that delivering products on or ahead of time is vital.
We know that a slow supply chain is not only frustrating but also costly.
This is why we keep a high stock of our key Signaline cables, controllers and fixation clips.
And if you need your linear heat detection cable in a hurry we are pleased to be able to offer overnight delivery to most of Europe and the UK.
If your company is further afield please contact our sales team for our excellent global delivery times.
What’s more, we do not have a summer shutdown at LGM Products meaning we can respond on demand to all of your linear heat detection requirements.
Please contact our sales department to place your order and discuss your delivery arrangements.
We are pleased to inform our customers that the new Syncro XT+ Extinguishant Control Panel is fully compatible with our Signaline Fixed Temperature range.
The Syncro XT+ is a multi-area addressable extinguishant panel complying with EN12094-1. The panel can be used for up to 16 zones over 1 or 2 loops making it suitable for small or large fire extinguishing systems.
Our Signaline Fixed Temperature (FT) linear heat detection cable can be linked to an addressable interface of the Syncro XT+ loop.
When Signaline FT detects a fire, the panel identifies the detector’s address locating the fire and releasing an extinguishing agent to the specific area.
Signaline FT is maintenance free, low cost and easy to install. Used in conjunction with the Syncro XT+, customers will benefit from a cost-effective fire detection solution which quickly detects and identifies the location of a fire.
Signaline also reduces instances of false alarms meaning the extinguishing agent is not released unnecessarily causing unwanted damage and costly repairs.
Among many applications, the Syncro XT+ and Signaline FT combination is suitable for use in computer server rooms, IT infrastructure, kitchens and factories.
The panel can also be used with Apollo or Hochiki addressable loops.
Both the Syncro XT+ and Signaline FT are available for purchase from LGM Products.
Please contact our sales team directly for more information: email@example.com.
Signaline now has a brand new website – keeping you up to date with our comprehensive range of linear detection products for fire, water and liquefied natural gas (LNG).
The site has a range of new and improved features including:
- Brand new search facility allowing you to search by product name and code
- New and improved site navigation with expandable menus
- Filter products quickly by alarm temperature, environment and industry approval
- ‘Related products’ are clearly displayed
- Comprehensive product information in PDF datasheets
- Responsive design for use on mobile and tablet
Check it out today!
Did you know that Signaline offers the only EN54 approved analogue linear heat detection system in the world which is loop powered and addressable?
Our Signaline SKM-95 Controller – approved by VdS – is compatible with Apollo XP95/Discovery addressable systems.
The controller has its own addressing dip switch and is powered directly from the loop. This eliminates the need for loop interfaces or additional power supplies and provides significant cost savings.
Using a Signaline SKM-95 Controller is an ideal way of integrating linear heat detection with large BMS fire systems, such as in a multi-storey car park installation.
Combining the SKM-95 Controller with Signaline HD analogue cable allows you to integrate this part of your fire detection system onto the same loop as other areas of your network. In short, it’s a very efficient and practical form of fire detection.
The SKM-95 Controller is also IP65 rated and comes with an End of Line Unit, making installation extremely simple and efficient.
If you would like to make an enquiry about this product please email: firstname.lastname@example.org.
Designing an effective fire detection system for fuel storage tanks poses particular challenges.
Fuel storage tanks are located in hazardous areas, can be exposed to harsh weather, and often incorporate a ‘floating roof’ which means there is the added complication of a moving structure.
Signaline linear heat detection is an excellent method of protecting fuel tanks from fire and we are keen to meet any challenge faced by our customers.
Where a ‘floating roof’ is part of the design, Signaline’s Retractable Cable is required to connect the Signaline system to the top of the moving tank.
The Retractable Cable extends and retracts as the floating roof moves up and down ensuring that system integrity is maintained.
Normally, Signaline Retractable Cable is supplied with 3 metre flying tails for termination. But on a recent project in Saudi Arabia our customer required unusually long tails for the cable at both ends of the installation.
We were able to supply them with Retractable Cable which included 5 metre tails top and bottom – a bespoke solution which is not readily available on the market.
The Retractable Cable also comes with a Hytrel coating – a thermoplastic material which combines flexibility and excellent durable toughness to ensure that the cable will not be affected by UV light and hazardous gases.
If you are interested in how we can adapt retractable cable to suit your project requirements, please contact email@example.com.
Using unique patented technology, our award winning Signaline COLD Liquid Gas Leak Detection System is specifically designed to provide a highly sensitive and reliable solution for monitoring sudden leakage of liquefied (cryogenic) gas.
All the information for this innovative gas detection solution is now available on the Signaline website.
Our dedicated section for Signaline COLD includes background information on gas leak detection, our full product range and relevant technical datasheets.
The detection system has a wide variety of applications, but is particularly suited to the liquefied natural gas industry including LNG storage vessels, equipment and pipelines.
For more information or a quotation please contact our sales team on +44(0)1252 725 257 or email firstname.lastname@example.org.
Signaline is pleased to be working alongside Specialised Security Systems, Kuwait.
SSS will distribute our range of Signaline linear detection products within Kuwait as we continue to grow our business in the international marketplace.
In collaboration with SSS, we have also gained Civil Defense Approval for our Signaline products adding to our wide range of national and international approvals.
We are looking forward to working with a company which shares our passion for providing excellent products backed by first class customer service.
Our Signaline Fixed Temperature linear heat detection cable was recently chosen to protect a conveyor belt system for a cement works in Vietnam.
Cong Thanh Group selected Signaline FT 68 as it offers a low cost fire detection solution for industrial and manufacturing settings.
The linear heat detection cable provides early detection of overheating on the conveyor belt and can be easily removed, replaced or re-positioned during maintenance work.
The cable was integrated with third party fire equipment demonstrating that the Signaline range is a flexible and versatile option for installers.
Signaline linear heat detection cable is being used for the fire protection of Trafalgar Street, multi-storey car park in Brighton, UK.
The system was installed as part of a £4.2m modernisation project of two city centre car parks, which included structural repairs and refurbishment with new power, lighting, security and fire alarm systems.
Trafalgar Street car park operates 24/7 and has a capacity for 275 cars located on two underground levels.
The original fire alarm system consisted of traditional point type detection within the main car park areas. Due to the harsh environment, including corrosive sea air, these were prone to fail or false alarm.
Linear heat detection was specified as part of the refurbishment, as it is designed to operate in challenging environments and requires no ongoing maintenance.
A two-loop analogue addressable fire alarm system was installed with 1,250m of Signaline Fixed Temperature cable, split into 11 zones across the two floors.
For more details on using Signaline in car parks please click here.
The new Terminal 2 Building at Heathrow will serve an estimated 20 million passengers each year after it is completed in 2014.
And travellers will find Signaline linear heat detection beneath their feet if they use one of the terminal’s 18 new escalators.
Signaline HD Stainless Steel was the cable of choice for manufacturer Kone when they selected a fire protection solution for the escalators at the airport.
The linear heat detection cable is coated with a stainless steel braid combining superb mechanical strength with rapid fire detection. The accompanying controller is easily adjusted for any length of cable and the system is also resettable in the event of a fire.
A relay output means that the escalators are quickly closed down when the system goes into alarm to stop a fire spreading.
An effective heat detection system for escalators is a legal requirement after the 1987 King’s Cross fire and Signaline HD Stainless Steel is one of the best solutions.
Signaline HD-S can also be used for a variety of other applications where mechanical protection is paramount such as moving walkways, conveyor belts or industrial machinery.
Signaline linear heat detection has been installed in Ülemiste junction – one of Estonia’s most important and complex road hubs.
As well as connecting the eastern and western sides of Tallinn, the intersection carries traffic between the city centre and the capital’s international airport.
For years the junction has been a bottleneck in this rapidly developing nation but thanks to EU funding it is about to benefit from a major overhaul.
A €80m project will finance the construction of 7.5km of road, new viaducts, signage and lighting, a passageway for non-motorized users, gas and electrical lines, and three new tunnels.
The provision of fire detection in these tunnels was a top priority, but regular point detection can be problematic due to false alarms and difficult maintenance planning.
Signaline FT cable was an ideal alternative with its simple installation and low ongoing maintenance – features which were regarded as vital to the success of the project.
Contractors were also impressed with the fast reaction of Signaline FT and the ease of integration with the tunnel’s complex control systems. The junction is due to be completed by mid-2013.
For further information about using Signaline FT within road and access tunnels please click here.