New for 2018, LGM Products is pleased to announce the arrival of the Signaline LocatorPlus.
LocatorPlus is a combined distance locator and monitor module compatible with all Signaline FT and FT-R linear heat detection cables.
Approved by UL, the LocatorPlus gives users instance alarm point location along the Signaline FT linear heat detection cable. However, unlike previous locator devices the LocatorPlus can then remotely report this location via the MODBUS output.
Furthermore, the LocatorPlus can offer location along 2 different zones of Signaline FT cable, each upto 3000m long.
But that is not all! The LocatorPlus also acts as a monitor module for the linear heat detection. It will report both fire and fault on either zone. These alarms are also indicated via an internal buzzer and LEDs on the LocatorPlus. The LocatorPlus is compatible with any conventional fire detection panel or can operate on an addressable interface. The LocatorPlus can also be used as the activation device on gas releasing panels
The LocatorPlus has two operating modes. Independent mode will report an alarm on either zone of cable independently. However, if set to interlocking the alarm relays are not triggered until both zones are in alarm. Thereby removing any risk of false alarms.
To learn more, see the datasheet and manual please click here
Between 23-26th April 2018 LGM Products was pleased to present our range of Signaline Linear heat detection cables at the Securex Exhibition in Poznan in Poland.
This was the 22nd Edition of the exhibition held at the Poznan International Fair and it was the biggest yet! Incorporating exhibitors from around the world the show is the largest of its kind in Eastern Europe.
Supporting Signaline’s local distributor partner BK Grupe we had a great opportunity to show and demonstrate our range of linear heat detectors and water leak detection. We received a great reception with interest from a wide range of installers, end users and consultants. The use of the cable within conveyors, car parks and cable trays were all hot topics.
We would like to take this opportunity to thank all those whom took the time to visit us and discuss our products.
We look forward to seeing you again in 2020 if not before!
LGM Products is pleased to announce that we will be exhibiting our range of Signaline linear heat detection at the Parking & Property Show in London on the 10th May 2018.
The annual Parking & Property event is the one day in the year when property, parking, transport, technology and construction experts get together to explore the interaction between cars, people and places.
With the recent car park fires, including the New Year’s fire at Liverpool Echo Arena which destroyed 1,300 vehicles, there will be a particular focus on fire detection at the show.
We will be exhibiting our range of Signaline linear heat detection cable. These cables are perfectly designed for the car park environment:
- Protected against exhaust smoke and corrosive exhaust gases
- Reduced cost of installation
- Maintenance free
Importantly Signaline is also EN54 certified, compliant with EU building fire detection guidelines.
For more information regarding Signaline please contact the sales team
LGM Products is pleased to announce that we will be exhibiting our range of Signaline Linear heat detection at the Securex Exhibition in Poznan, Poland between 23-26th April 2018.
Last year’s SECUREX fair was co-created by almost 300 exhibitors who presented 150 new products from their offer. The wide range of events at last year’s fair attracted around 30,000 visitors.
2018 will be the 22nd edition of the exhibition of the show and stands to be the biggest show to date. It will be the first time Signaline is shown at this prestigious event.
Working with our local distributors BK Grupe, Signaline can be found on Stand 35 in Pavilion 7a.
On display will be our range of Signaline Linear Heat Detection including the Signaline SKM-03 EN54 approved analogue linear detector and Signaline FT (digital) linear heat detectors.
We look forward to seeing you there.
We are pleased to announce that our Signaline Fixed Temperature Linear Heat Detection Cable has been approved by the Korean Fire Institute.
This KFI approval for both our FT-68 and FT-88 cables demonstrate our continued commitment to providing our customers with high quality and internationally approved products.
Signaline FT linear heat detection cable detects a build-up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature, an alarm is initiated.
Linear heat detection is an ideal solution for applications such as conveyor belts, tank farms and high voltage cable trays.
Signaline FT is also UL and FM approved and now with KFI approval we look forward to exploring the Korean market further.
Click here for more information on our Signaline FT cable or contact our sales team for further assistance.
We are proud to be attending KORMARINE Trade Show in Busan this October. This year LGM Products will be exhibiting at Stand 4K19 in the UK Pavilion.
Celebrating its 20th anniversary this year, KORMARINE is the largest Marine Shipbuilding Business exhibition in Korea, and named 4th largest worldwide. The KORMARINE Show offers visitors a unique opportunity to see the latest industry innovations, focussing on four market sectors; Marine, Shipbuilding, Offshore and Oil and Gas.
LGM will be showcasing our range of marine approved fire detection, Signaline Linear Heat Detection and audio-visual signalling products.
LGM’s market leading panel offers boat owners and fleet managers an approved and cost affective fire detection solution.
- The latest control panel technology.
- Compact and available in 2, 4, 8 or 12 Zones.
- Approved to MED, LR and ABS.
Trusted by businesses in 49 countries around the world our range of Linear Heat Detection Cable is an ideal solution for a wide range of applications.
LGM has more than 25 years of audio visual signalling expertise in the marine and hazardous area industry.
Range includes NEW marine approved VTG sounder beacon and VTB beacon.
Extensive range of Stainless Steel, GRP and Aluminium sounder beacons and call points approved for hazardous areas and offshore environments.
Complete range of MED approved sounders and beacons for any application.
If you wish to get in touch with us in advance of the KORMARINE Show to find out more please contact our sales team.
We look forward to seeing you there