Signaline Catenary Wire is available as an optional addition to any of the Signaline Linear Heat Detection cables.
Signaline Catenary Wire aids in installing Signaline cable in areas which may be difficult to access, have large spans to cover or fixing the cable at the normal recommended spacing (up to 1.5m / 5ft intervals) would be
too difficult or time consuming.
The catenary wire is spiralled around the cable and makes the detector cable self-supporting.
A turnbuckle hook and support is sold separately to complete the installation.
Signaline FT -EN and FT cables come complete with hard wearing and durable outer coatings. However, in some applications, such as engine bays or conveyor belts, there can be a risk of mechanical damage to the Linear Heat Detectors.
In these applications we can offer any of our Signaline FT-EN or FT cables with a braided stainless steel outer coating. The standard cable has an additional SS316L braid weaved around it to ensure the highest level of mechanical protection.
The result is an immensely strong and durable linear heat detector that can be placed into areas were the cable maybe subject to mechanical damage.
Signaline FT-EN is a brand new linear heat detection system approved to EN54 part 28. Fixed Temperature Linear Heat Detectors detect a build up of heat anywhere along their length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated.
The Signaline FT-EOL-EN End-of-Line Unit has been approved to EN54-28:2016 for use with the LocatorPlus-EN Control Unit and FT-78-EN or FT-88-EN Signaline Linear Heat Detection cables.
It is designed to effectively terminate up to two zones of FT-78-EN or FT-88-EN cable in a secure, weatherproof enclosure.
Furthermore, the built in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ, providing comprehensive testing and maintenance of the system.
Signaline FT-EN is a brand new linear heat detection system approved to EN54 part 28. Fixed Temperature Linear Heat Detectors detect a build up of heat anywhere along their length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated.
Signaline FT-EN is approved by UL to EN54 part 28 as non-resettable line type heat detector. It is Low Smoke Zero Halogen (LSZH) and is available in either 78°C or 88°C alarm temperatures.
The cable outer coating is made from a UV and chemical resistant compound making the cable suitable for even the harshest of environments.
Signaline FT-EN is used with the Signaline LocatorPlus-EN and FT-EOL-EN to make a complete EN54 part 28 approved system.
