by LGM Products
+44 1252 725257
sales@lgmproducts.com
Contact us

Signaline FT-EN is a brand new linear heat detection system approved to EN54 part 28. Fixed Temperature Linear Heat Detectors detect a build up of heat anywhere along their length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated.

The Signaline FT-EOL-EN End-of-Line Unit has been approved to EN54-28:2016 for use with the LocatorPlus-EN Control Unit and FT-78-EN or FT-88-EN Signaline Linear Heat Detection cables.

It is designed to effectively terminate up to two zones of FT-78-EN or FT-88-EN cable in a secure, weatherproof enclosure.

Furthermore, the built in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ, providing comprehensive testing and maintenance of the system.

Signaline FT-EN is a brand new linear heat detection system approved to EN54 part 28. Fixed Temperature Linear Heat Detectors detect a build up of heat anywhere along their length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated.

Signaline FT-EN is approved by UL to EN54 part 28 as non-resettable line type heat detector. It is Low Smoke Zero Halogen (LSZH) and is available in either 78°C or 88°C alarm temperatures.

The cable outer coating is made from a UV and chemical resistant compound making the cable suitable for even the harshest of environments.

Signaline FT-EN is used with the Signaline LocatorPlus-EN and FT-EOL-EN to make a complete EN54 part 28 approved system.

Signaline LocatorPlus is a revolutionary new controller and alarm locator for Signaline FT and Signaline FT-R range of linear heat detectors.

Housed in an IP66 enclosure the Signaline LocatorPlus is capable of monitoring 2 separate zones of Signaline FT or Signaline FT-R, with up to 3km of cable per zone. Signaline LocatorPlus will give exact alarm location, via its LCD display, of any over heat along either zone of cable.

It is compatible with either conventional or addressable fire systems via the alarm relay contacts and offers further connectivity via the MODBUS output.

The Signaline LocatorPlus also offers two operating functions; Independent or Interlocking mode. When set to Independent if either zone of cable alarms this is immediately reported via the relays to the control panel. Alternatively Interlocking will wait for both lines of cable to be in alarm before triggering the relays.

Signaline LocatorPlus is UL approved and can be integrated with a suitable barrier when the linear heat detection is to be used within a hazardous area

LHD Alarm Temperature: 88°C; Outer Sheath: Chemical Resistant Black Nylon

Signaline Fixed Temperature Linear Heat Detector (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated. Signaline FT is available in four different temperature settings and two outer cover options making the Signaline FT suitable for use in a very wide range of applications

Signaline Fixed Temperature Linear Heat Detector (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated. Signaline FT is available in four different temperature settings and two outer cover options making the Signaline FT suitable for use in a very wide range of applications